For drill.
For porcelain stoneware and ceramics generally. For drills with 13 mm chuck, no percussion. Optimum minimum rpm 1,500 rpm. For superior performance, cool while drilling, repeatedly removing and replacing the tool in the hole. Start drilling at a 45° angle then proceed with a circular movement.
For sanding machine.
For porcelain stoneware and ceramics generally. Use with angle grinders. Warning, for correct use dry: optimum rpm 11,000/13,000 rpm. For superior performance, cool while drilling, repeatedly removing and replacing the tool in the hole. Start drilling at a 45° angle then proceed with a circular movement.
Useful core bit length: 35 mm.
| TECHNICAL TABLE | |
| Cured Concrete / Bricks / Roofing tiles | |
| Slightly reinforced concrete | |
| Highly reinforced concrete | |
| Granite/ Natural stone / Porphyries | ★★ |
| Marble | ★★ |
| Refractories | |
| Sandstone/Washed gravel slabs | |
| Double fired ceramic tiles | ★★★★ |
| Single fired ceramic tiles | ★★★★ |
| Porcelain stoneware/Klinker tiles | ★★★★ |
| Mosaic glass | |
| Brick glass | |
| Cutting speed | ★★★ |
| Average life | ★★★ |
| sufficient ★ average ★★ good ★★★ excellent ★★★★ super ★★★★★ | |
| CAN BE USED ON THE FOLLOWING MACHINES | |
 6-8-10-12-14 |
 6-8-10-12-14-16-18-20-25-30-35-40-45-50-55-60-70-80-90-100 |
