FRESAMAX 125 is the new milling machine for laying underfloor heating pipes in the Maxima range. Compact and ‘short wheel base’, it allows dust-free operation thanks to the ergonomic saw guard; the possibility of removing the wheel at the rear guarantees maximum precision even in the tightest corners and curves close to the wall. The transmission from motor to diamond disc is by a short bar and shielded bearings to improve power and performance. The thrust bar, symmetrical for greater comfort during work, is axially and radially adjustable. The protection bracket for motor and rotating parts allows safe operation. The milling depth is up to 34 mm with a 0125 mm cutter.
|Power input: 2200 W – 230 V||Depth adjustment: 0,4 cm / giro|
|Disc Diam: 125 mm – Bore 22.2||Set-up for vacuum cleaners|
|Idle Rpm: 6700 / Min||Acoustic Level: 86 dB|
|Maximum milling thickness: 20 mm||Weight: 60 kg|
|Max. cutting depth: 35 mm||Dimensions: 1120 x 480 x 490 mm|
MILLING MACHINES for heated floors are designed to achieve the best performance depending on the surface to be cut and adapted to our FRESAMAX 125. Developed for heated floor installation professionals. They meet the standards of EN13236 and are oSa-certified.
|TECHNICAL TABLE||GOLD CUTTER||RED CUTTER||BLACK CUTTER|
|Cement / Bricks||★★★||★★★||★★★|
|Lightly reinforced concrete||★★★||★★★||★★★|
|Heavily reinforced concrete||★★★||★★★||★★★|
|Granite / Natural Stone / Porphyry||★★★||★★★||★★★|
|Sandstone / Washed gravel slabs||★★★||★★★||★★★|
|Porcelain stoneware / Klinker||★★||★★||★★|
|sufficient★ average★★ good★★★ excellent★★★★ super★★★★★|
|125||13 – 15 – 16 – 17 – 18|